CM6802_文档.pdfVIP

CM6802 NO BLEED RESISTOR GREEN MODE PFC/PWM CONTROLLER COMBO GENERAL DESCRIPTION FEATURES The CM6802 is a green PFC/PWM. It is the new generation Patent Number #5,565,761, #5,747,977, #5,742,151, of ML4802, ML4841, ML4801 and ML4824-2. Its system #5,804,950, #5,798,635 clock frequency is generated by the external RT and CT, fosc=2 x fpwm =4 x fpfc and then its PWM frequency is 50% of the clock and its No bleed resistor required PFC frequency is 25% of the clock. CM6802 is designed to Before the chip wakes up, IAC can start up VCC be pin-pin compatible with CM6800 family, ML4800 family Pin to pin Compatible with CM6800, ML4824 and ML4800 and ML4824 family. Its PWM (DC to DC section) can be (It needs to modify the values of the external component to easily configured to Voltage Mode or Current Mode. The work properly). green mode function can easily be designed so during the User Program PFC automatic green mode threshold no load condition, its input power can be less than 0.75Watt (patented) without shutting off PFC. Its PFC green mode threshold and User Program PWM automatic green mode threshold the PWM green mode threshold can separately set by (patented) selecting the proper the RC filter at ISENSE pin (pin3) and Input power less than 0.75Watt without shutting off PFC at CT on RAMP 1 pin (pin 7). Power Factor Correction (PFC) no load condition. allows the use of smaller, lower cost bulk capacitors, Additional folded-back current limit for PWM section. reduces power line loading and stress on the switching 23V Bi-CMOS process FETs, and results in a power supply that fully compiles with PWM pulse keeping for the green mode IEC-1000-3-2 specifications. Intended as a BiCMOS