AS5145A-HSST-500;AS5145B-HSST-500;中文规格书,Datasheet资料.pdfVIP

Datasheet AS5145H/AS5145A/AS5145B 12-Bit Programmable Magnetic Rotary Encoder 1 General Description Three incremental outputs Quadrature A/B (10 or 12 bit) and Index output signal (pre- The AS5145 is a contact less magnetic rotary encoder for accurate programmed versions available AS5145A for 10-bit and angular measurement over a full turn of 360 degrees. AS5145B for 12-bit) It is a system-on-chip, combining integrated Hall elements, analog User programmable zero position front end and digital signal processing in a single device. Failure detection mode for magnet placement, monitoring, and To measure the angle, only a simple two-pole magnet, rotating over loss of power supply the center of the chip, is required. The magnet can be placed above or below the IC. Red-Yellow-Green indicators display placement of magnet in Z- axis The absolute angle measurement provides instant indication of the magnet’s angular position with a resolution of 0.0879º = 4096 Serial read-out of multiple interconnected AS5145 devices positions per revolution. This digital data is available as a serial bit using Daisy Chain mode stream and as a PWM signal. Tolerant to magnet misalignment and gap variations An internal voltage regulator allows the AS5145 to operate at either Wide temperature range: - 40ºC to +150ºC 3.3V or 5V supplies. Fully automotive qualified to AEC-Q100, grade 0