RHEL5上制作Soft RAID.docxVIP

RHEL5上制作Soft RAID,并在Soft RAID基础上做LVM来源: ChinaUnix博客　日期： 2008.08.01 11:18　(共有0条评论) 我要评论?很久都没有操作都忘的差不多了，重新练练，加深点印象。这些操作都是在VMWare虚拟机上进行的。首先把RHEL5安装在/dev/sda上。安装完后从添加了四块硬盘，分别是/dev/sdb、/dev/sdc、/dev/sdd、/dev/sde以root进入系统，首先看一下磁盘的情况：[root@TSM54-Test ~]# fdisk -lDisk /dev/sda: 15.0 GB,bytes255 heads, 63 sectors/track, 1827 cylindersUnits = cylinders of 16065 * 512 = 8225280 bytes? ?Device Boot Start End Blocks Id System/dev/sda1 * 1 13 104391 83 Linux/dev/sda2 14 18278e Linux LVMDisk /dev/sdb: 8589 MB, 8589934592 bytes255 heads, 63 sectors/track, 1044 cylindersUnits = cylinders of 16065 * 512 = 8225280 bytes? ?Device Boot Start End Blocks Id SystemDisk /dev/sdc: 8589 MB, 8589934592 bytes255 heads, 63 sectors/track, 1044 cylindersUnits = cylinders of 16065 * 512 = 8225280 bytes? ?Device Boot Start End Blocks Id SystemDisk /dev/sdd: 8589 MB, 8589934592 bytes255 heads, 63 sectors/track, 1044 cylindersUnits = cylinders of 16065 * 512 = 8225280 bytes? ?Device Boot Start End Blocks Id SystemDisk /dev/sde: 8589 MB, 8589934592 bytes255 heads, 63 sectors/track, 1044 cylindersUnits = cylinders of 16065 * 512 = 8225280 bytes? ?Device Boot Start End Blocks Id System一.创建Soft RAID1.创建raid分区[root@TSM54-Test ~]# fdisk /dev/sdbThe number of cylinders for this disk is set to 1044.There is nothing wrong with that, but this is larger than 1024,and could in certain setups cause problems with:1) software that runs at boot time (e.g., old versions of LILO)2) booting and partitioning software from other OSs? ?(e.g., DOS FDISK, OS/2 FDISK)Command (m for help):nCommand action? ?e extended? ?p??primary partition (1-4)pPartition number (1-4): 1First cylinder (1-1044, default 1):Using default value 1Last cylinder or +size or +sizeM or +sizeK (1-1044, default 1044):Using default value 1044Command (m for help): tSelected partition 1Hex code (type L to list codes): L0??Empty? ?? ?? ???1e??Hidden W95 FAT1 80??Old Minix? ?? ? be??Solaris boot1??FAT12? ?? ?? ???24??NEC DOS? ?? ?? ?81?