挤塑聚苯乙烯泡沫板外墙外保温施工工法（Construction method for external thermal insulation of extruded polystyrene foam board）.docVIP

挤塑聚苯乙烯泡沫板外墙外保温施工工法（Construction method for external thermal insulation of extruded polystyrene foam board） Construction method for external thermal insulation of extruded polystyrene foam board 1 Preface Exterior insulation insulation energy-saving technology become the promotion of building exterior insulation layer on the outside of the main structure, the main structure to protect and extend the life of the building; external insulation can effectively reduce thermal bridge building structure, eliminating the wall condensation phenomenon, improve the living comfort. The extruded polystyrene foam board is made of polystyrene resin and other raw materials and polymers, which are mixed by heating and injected into the catalyst, and then extruded and extruded to form the rigid foam board. The foam board can effectively prevent the penetration of water molecules containing water vapor, even when subjected to mechanical damage or surface galling in the state, but also can effectively maintain the lower water absorption, rarely aging phenomenon, it has very low thermal conductivity and high compressive strength, high thermal efficiency. The exterior insulation technology of extruded polystyrene foam board is one of the effective methods for building energy saving. 2 characteristics of construction methods This method has three features: first, through the method of mesh over packet processing reasonably eliminates the gap between the bridge, is easy to solve the cracks problems in these regions. Two. The insulation layer and structure are connected well, the construction is convenient, and the working procedure is compact. In three, the door window node, decorative line slot, curved balconies and other parts adopt reasonable construction method, to avoid these parts Konggu quality defects. 3 construction process 3.1 process principle Insulation board before the construction of the wall in the wall cleaning, coating interface agent paste extruded polystyrene foam board,