振动防堵器（Vibration anti blocking device）.docVIP

振动防堵器（Vibration anti blocking device） Application analysis of Shandong grand vibration anti blocking device I plant began burning coal from the times in late April of this year, due to changes in coal, coal water is large, the original coal handling equipment has been unable to meet the needs of coal during low load operation, even if it has repeatedly been forced into short combustion oil. To this end we will be sent to the personnel of coal unloading coal operation help coal, so that each position increased to two people, even if the operator tired or exhausted phenomenon often appears dead. In order to solve the problem of blocking coal to Hebi Fenghe crane power plant, it is found that the design of vibration anti blocking device in Shandong Hongwei power equipment factory is reasonable. Therefore, we chose Shandong grand vibration anti blocking device. In from August 4th to 15th, the Shandong grand coal mine carried out the first transformation of the coal handling A system, mainly on the following major coal plugging points were modified, respectively: 1. The anti blocking device is installed on the 3#A coal pipe at the tail of the belt. In the installation of anti clogging device before the site frequently blocked, and the coal falling pipe is not easy to clean up a long, long time blocking coal processing; after the transformation has changed, but the lower air lock due to the installation commissioning defects, the coal dropping pipe forming step coal are serious. 2. The falling coal pipe of the 3#A belt machine head two turns back below the three pass is changed into a special falling coal pipe which directly enters the roller screen, and a vibration anti blocking device is arranged on the special-shaped coal falling pipe. Before the transformation part of one of the main reasons for the 3#A belt conveyor head coal blockage; after transformation to solve the coal problem here is blocked, since the transformation after the operation here never happened coal