数控铣床操作工（CNC milling operator）.docVIP

数控铣床操作工（CNC milling operator） CNC milling operator I. conditions for registration 1, with one of the following conditions, may apply for an entry-level job: (1) working in the same profession for two years or more than four years; (2) completion of primary training. 2, with one of the following conditions, may apply for intermediate workers: (1) the initial work grade certificate of the declared profession (work) shall be three years; (2) obtain the primary work certificate of the declared profession (job) and finish the training through the intermediate worker training; (3) graduates of institutions of higher learning and secondary specialized schools are engaged in Vocational and technical work corresponding to their major. 3, with one of the following conditions, may apply for senior staff: (1) obtaining the intermediate work grade certificate of the declared profession (work) for four years; (2) obtain the intermediate work grade certificate of the declared profession (work) and finish the training through senior engineer; (3) graduating from institutions of higher learning and obtaining intermediate job certificates of the profession (work) to be declared. Two, examination outline (1) basic requirements 1 professional ethics 1.1 basic knowledge of professional ethics 1.2 code of practice (1) comply with laws, regulations and relevant regulations. (2) love and respect, have high sense of responsibility. (3) strictly implement work procedures, work specifications, process documents and safety operation procedures. (4) serious and responsible work and unity and cooperation. (5) take care of equipment and tools, jigs, knives and measuring tools. (6) dress neatly and comply with the regulations; keep the working environment clean and orderly and civilized production. 2. basic knowledge 2.1 basic theoretical knowledge (1) knowledge of drawing. (2) tolerances and fits. (3) common metal materials and heat treatment knowledge. (4) commonly used non-metallic materials. 2