温度继电器检测实现的方法（Method for detecting temperature relay）.doc

温度继电器检测实现的方法（Method for detecting temperature relay） Method for detecting temperature relay 0 Introduction The temperature relay is usually used to cut off the circuit automatically when the temperature is abnormal, and the functions of overheat protection, temperature control, fire alarm and automatic ignition are realized, and the accident is avoided effectively. Therefore, it is widely used in various fields. The key process of producing temperature relay is the detection of temperature characteristics (operation temperature at heating time and recovery temperature during cooling). In the past, mercury thermometers were mainly used for manual inspection. The method has low detection efficiency, large labor intensity and poor precision. With the continuous progress of science and technology, automatic detection methods gradually replace manual detection methods. At present, there are mainly kinds of temperature characteristics at home and abroad, namely, liquid method, air test, test block method, _1. The liquid method, although with constant temperature, good temperature uniformity and high precision, but due to the measured product directly immersed into the liquid, the use scope is restricted, was used for the detection of the sealed relay; block method, detection at room temperature, specimen temperature regulation difficult, poor accuracy, not suitable for batch production method; air, the temperature can be set, and mixing air heating equipment. The test accuracy is not as good as the liquid method, but the operation is simple and the product structure is not sealed. It is very suitable for mass production. In summary, 3 methods have their own characteristics, this study is aiming at an aviation factory according to the requirements of the actual characteristics and technology of detection products, comprehensive analysis determined to carry out air determination as the basis, and the conduct of research and development from two angles of temperature uniform