看二手车攻略（See second-hand car introduction）.docVIP

看二手车攻略（See second-hand car introduction） See if there are any major accidents in the frame, and teach you the most professional and simplest method: (diagonal) Step 1: see if the overall cleanliness of the engine room is particularly clean, clear and specially cleaned The first step is to open the hood and observe the integrity of the engine compartment. After a long period of use of the vehicle, the engine room will accumulate a lot of dust, this is a very normal situation. But if you find a place that is clearly cleaner than the rest of the world, you need to be careful. Can we wonder or wonder if the place has been repaired? Otherwise, theres no reason to do anything special about it. The second step: measuring the distance from the suspension bracket to the headlight, comparing the wheelbase length of the left and right sides The second step, you can take a general tape measure of the front shock absorber bracket to the headlight distance, diagonal measurements. It is not necessary to know what the standard data is before measuring, as long as the data measured on both sides are the same, or the error is within 5 millimeters, even if it is normal. The third step: to see whether the water tank frame and rear end plate and A/B/C column are in good condition, whether or not there is any trace of metal cutting After the completion of various data measurements, and found that the above data comparison is not the same, the removal of the accident car work has basically completed 80%. Then observe the floor of the water tank, the rear end plate and the floor of both sides of the backup tire are in good condition, there is no obvious metal plate or cutting welding marks. If there is a slight sheet metal mark, there is no harm, but if there is a cut or welding traces, it proves that this is an accident car. After that, if you really like the car, and after the car dealer agrees, you can remove the sealant around the door to see if the A/B/C column has non original weldin