一种新型超宽共模输入范围放大器设计-电子器件.pdfVIP

第35卷 第5期 电 子 器 件 Vol.35摇 No.5 2012年10 月 ChineseJournal of Electron Devices Oct.2012 Design of Novel Operational Amplifer with Ultra鄄Width Common鄄Mode Range* * YU Guoyi ,ZHANGLe,ZHENGMeijun,ZHONGJianfu (Department of Electronic Science and Technology,Huazhong University of Science and Technology,Wuhan430074,China) Abstract:On base of analyzing the general input stage structure of the CMOS operational amplifierwith ultra鄄width input common鄄mode range(ICMR),designing of a novel kind of CMOS circuit structure an operational amplifier with ultra鄄width ICMRhasbeenrealized.By theamplifyingfeedbackdifferencelevelbetweentheinput CMandthe input reference common鄄mode level and feedbacking it to input,the input common鄄mode(CM)of OP core would approach the reference common鄄mode level,which can make a ultra鄄width ICMR,and the performances of OP core stable.This circuit was designed in TSMC 0. 13 滋m CMOS process technology,and simulated by Cadence.The simulated result shows that while the supply power was 3.3 V,the range of input CM was -1.5 V ~4.8 V,the open鄄loop gain was74 dB,the GBW was 11郾4 MHz,and the PMwas74毅. Key words:operational amplifer;ultra鄄width input common鄄mode range(ICMR);input stage;complementary metal oxide semiconductor(CMOS)process EEACC:1220摇 摇 摇 摇 doi:10.3969/j.issn.1005-9490.2012.05.004 一种新型超宽共模输入范围放大器设计* * 余国义 ,张摇 乐,郑梅军,钟建福 (华中科技大学电子科学与技术系,武汉430074) 摘摇 要:在分析传统CMOS宽共模输入级结构基础上,设计了一种新型CMOS 电路结构实现超宽共模输入范围(ICMR)的运 算放大器。 此设计通过提取输入共模电平与参考共模电平比较放大,反馈到输入信号端,使信号在放大前共模电平趋近参考 共模电平,可扩大输入共模电平范围,并有利于OP core性能保持稳定。 电路采用TSMC0.13 滋m CMOS工艺进行设计,利用 Cadence仿真,结果表明:在3.3 V 电源电压下,输入共模范围为-1.5 V ~4.8 V,开环增益为74 dB,单位增益带宽为 11.4 MHz,相位裕度为74毅。 关键词:运算放大器;超宽共模输入范