主油泵温度传感器e18303-1-05-03_ETS1700.pdfVIP

Electronic Temperature Sensor ETS 1700 Application: The electronic temperature sensor ETS 1700 is used together with the temperature sensor TFP 100, which was specially developed for tank mounting. The 4-digit display can indicate the actual temperature, one of the switching points or the maximum temperature. The maximum temperature indicates the highest temperature which has occurred since the unit was switched on or was last reset. The 4 switching outputs can be used to control heating and cooling processes in hydraulic systems, for example. 4 switching and switch-back points which are independent of each other can be adjusted very simply via a membrane keypad. For incorporation into monitoring systems (e.g. with PLC), an analogue output (4 .. 20 mA or 0 .. 10 V) is also available. Special features: Temperature range 0 .. 100 °C (32 .. 212 °F) 4-digit digital display Simple operation by means of key programming 4 critical value relays, switching points and switch-back points can be adjusted independently Option for analogue output signal (4 .. 20 mA or 0 .. 10 V) Many useful additional functions Optional mounting position (sensor connection on the top/bottom, keypad and display can be turned through 180°) Setting options: Switching point / switch-back Pin connections: The integral microcomputer within the point: Relay outputs, analogue output, supply ETS 1700 enables many useful extra The switching point is defined as being the voltage functions in addition to the switching temperature value, which when it is functions, compared with a normal