客车车身材料（Bus body material）.docVIP

客车车身材料（Bus body material） First, the use of plastic body The latest development of commercial vehicle plastic products is the large-scale production and assembly integration. At present, the body plastic products, more than 1m products have been very common, and some plastic products length has reached more than 2m. At the same time, the integration of products has been improved, and the assembly such as dashboard has been integrated into the assembly line, which also leads to a more complex structure of plastic products. In this way, not only the material with high flow, high rigidity and other basic performance requirements, the color of the material must also have good stability. Advanced processing technology used to ensure product performance, reduce distortion and so on. The following is just a few larger quantities of materials used to introduce the current status of plastic body. 1 、 modified PP material In the body plastic material, the most widely used is the modified PP series material. The use of components includes dashboard, door guards, decorative panels and other large interior parts and bumpers, water tanks, masks, fenders, spare parts. Modified PP based polyolefin materials have accounted for more than 50% of the use of automotive plastics. Modified PP materials are currently in use, with particular attention to the following characteristics: At present, the melt index of modified PP material usually reaches 20 ~ 30g/10min. In this way, the strength of the weld line can be increased and the welding line on the surface can be reduced. In order to guarantee the apparent color requirement of the material, the choice of the modified PP base material is more strict, so it is necessary to use the specially synthesized PP material to meet the requirement of modification. The performance requirements are reasonable. For different parts of the product, the material performance requirements are more reasonable. For example, the modified PP used by the dashbo