家装中室内线路配线问题 进达装饰（Home decoration in the interior wiring problems into decoration）.docVIP

家装中室内线路配线问题 进达装饰（Home decoration in the interior wiring problems into decoration） Indoor wiring: Indoor wiring can be divided into two kinds of open and concealed. Laying: the conductor is laid along the wall, ceiling surface, truss beam, roof column and so on. Concealed: wire through the tube, buried in the wall, floor or ceiling. Generally speaking, the construction and inspection and maintenance of the wiring are more convenient, but the indoor appearance is affected. The place that people can touch is not very safe. The requirements of the installation of the dark wire assembly are high, and the inspection and maintenance are difficult. Wiring methods are generally divided into: porcelain (plastic) plywood, wiring, insulators Wiring, groove plate wiring, plastic sheath line, wiring and wire pipe wiring etc.. This course focuses on the distribution of insulators, plastic sheathing, wiring and line distribution. Indoor electrical installation and wiring construction should be safe and reliable transmission of electricity, reasonable layout of the line beautiful, solid wiring installation. Insulator wiring Also known as the porcelain insulator wiring wiring, a wiring using insulator support wire, used for wiring. The insulator is higher and the mechanical strength is large. It is suitable for occasions with larger power consumption and humidity. Insulators usually have drum insulators, which are usually made of wires with smaller cross sections. There are butterfly insulators, pin insulators and suspension insulators. Http:///pro/241.aspx 1. insulator wiring method: (1) the positioning and positioning work is done before the construction is done. According to the construction plan to determine the installation site of electrical appliances, wire laying position and installation location of insulators. (2) scribing Crossed line bag or edge available size of wood. In fixed insulators a X, fixed point spacing between the bearing capacity of the insulator are considere