工厂化装修（Factory decoration）.docVIP

工厂化装修（Factory decoration） With the development of architectural decoration industry mature technology, division of labor is getting smaller, a large project can be divided into: wall installation, installation, installation of ceiling, marble, wood products, mechanical and electrical installation, installation and installation of hardware and soft decoration arrangement etc.. Used in the construction process of these parts are produced in the field, now has achieved most of factory production, finished the installation site, such as marble, wood, metal, wood products including on-site installation is just emerging, in the decoration plays a very important part, because the scope of wood products the product installation involves relatively wide, such as the production process control of procurement of raw materials, wood products, field size and product positioning, to the scene and how to arrange the installation of the construction workers everything in good order and well arranged. Although there are already many decoration companies and furniture factories in the market already engaged in the operation of wooden products assembly type construction, but the real formation of scale, more reasonable, mature not much. Due to the whole process of wood products is not enough to understand, in the construction process there will be a lot of side effects, and do not know how to prevent the occurrence of these problems, which makes many people doubt the wood products assembly construction is feasible, then please let us know the wooden products assembled in the construction of meaning and importance and in the whole process should pay attention to what the problem. (wood products assembly type construction, commonly known as wood finishes, finished product installation, the following commonly used commonly known as more appropriate). First, the definition of wood finishing products installed: The so-called veneer assembly construction is in the decoration process, the wo