电力系统实习日志（Power system practice log）.docVIP

电力系统实习日志（Power system practice log） Transformer disassembly and assembly Todays internship is transformer disassembly and assembly. Through todays practice, we understand the structure of the transformer, to recognize the insulation of substation equipment, insulation, power loss and other aspects of the requirements. A transformer is a device that transforms a class of voltage and current into another voltage and current of the same frequency. The transformer is implemented by magnetic coupling between two windings around the same core. We assemble and disassemble a double winding transformer, which consists of two windings sheathed on the same core. The core is not a single piece of metal, but is a lot like E and a glyph, hand to expose, on the other hand, reduce eddy current, reducing the loss. We are winding through automatic winding machine, the 15 coil coil is about to form 1V voltage, and when the support frame is covered with an insulating line, it begins to bypass the low-voltage winding. At the beginning and at the end, pay attention to tightening the line. Do not cross over while winding. A spacer layer of insulating paper, between the high and low voltage windings to clamp two layers of insulation paper, low-voltage winding coil winding number is less than, their ratio is the ratio, all around after around two layers of insulating paper, winding is completed. Cross the iron core and fit the casing. Through the content of todays internship, I deeply understand the transformer, an important electrical equipment, for the future production practice laid the necessary foundation. Low-voltage equipment Todays internship is low voltage equipment. We learned the wiring of the household distribution system. I understand the use of low voltage equipment and its internal structure. Indoor distribution structure is generally for the next line and down line, switch is divided into bipolar and unipolar switches. The bipolar switch controls the on-off of the FireWire a