磁带转录mp3（Tape transcription mp3）.docVIP

磁带转录mp3（Tape transcription mp3） 09:05 2012-10-22 1. Connect the output of the recorder with the sound card input of the computer with a connecting line with 3.5 pairs of channels at both ends, remove the unused plug on the socket, turn off the other electrical equipment in the room, and reduce the interference. 2, open Adobe Audition to create a new waveform: sampling rate of 44100, stereo, 16 3, multi track - track 1 lit R recording Backup button, open the tape recorder to play, the volume to the high position, point the recording button in the transmitter, start recording 4 start a blank section at the beginning 5, after recording, click Edit mode, select the blank part of the pre recording - point effects in the repair of noise reduction preset noise files - to determine 6, select all the recording content - point effects in the repair of the noise reducer (process) - - determine - save 7, the use of format factories to record the recording file, conversion format, that is completed. To the high volume: import sound files, edit mode, select the volume to adjust the volume - effect - amplitude and pressure limit - Standardization (process) - to set a high ratio in the main: for example, 150%. 14:58, 2012-10-22 Remove the vocal part of the song with only background music: Import songs, select the removed parts, menu - Edit - Convert sample type - mono - left mix: -100, right mix: 100-- OK The simplest way to eliminate the original singing. First, enter the single edit mode interface. Use File to Open to enter an audio file. I have Harlem Yus fate as an example, the document called fate.MP3.. After the call, select Effects, Amplitude, Mixer, Channel... (the Chinese version is effect - waveform amplitude - vocal fold). In the preset, select Vocal Cut, see (Figure 1), keep the default settings on the dialog box, and click the OK button. After the process, you got the accompaniment music of the song fate. The principle of Vocal Cut function is to eliminate all the soun