注塑机简单维修（Simple maintenance of injection molding machine）.docVIP

注塑机简单维修（Simple maintenance of injection molding machine） Temperature class Attention must be made to ensure that the machine is well grounded and that there is no leakage. The temperature sensing line must be separated from the AC line First, the temperature is not displayed and is shown to be zero 1, turn off the electricity to check whether the CPU is normal - such as PCB being water soaked, oil immersed, sundries entering, non-human destruction, or IC burning phenomenon. If the above phenomenon is changed, the main CPU board will be replaced 2, check the power supply is normal 3, check whether the temperature line is locked, whether the positive and negative poles are connected or not 4, multimeter, Ohm block, all the AC and DC with the machine resistance, [should be more than 1 ohms] 5, power transmission, according to multimeter AC block measurement, machine has leakage, the method is as follows; A, the machine must be grounded, the best is a pillar [about] buried at least 50CM wide thumb. B, according to the ACX1000 block, one end of the wet ground, one end of the receiving platform, that is, there is no leakage 6, the temperature board socket, first plug, send electricity to see if there is no temperature display, if there is check, SSR whether short circuit or leakage If this is still not displayed, DA-TEMP will ask on the warm line pulled out the original contact, the temperature line ends with positive and negative short-circuit if there is no display, check or replace the temperature line. If not, then replace the plate temperature, temperature or adapter. 7, the normal work of the host only LED1 flashes to indicate the host normal but not the display panel and the CPU communication RS232 check whether communication is normal. If the RS232 cable is normal, check whether the normal display panel [MMI] display panel CPU [LED1] will flash work, if you do not work to replace the CPU board display panel or program board. Two, unable to heat up 1, the temperatu