浅谈高层建筑外墙防渗漏施工技术（Construction technology of exterior wall seepage prevention for high rise building）.docVIP

浅谈高层建筑外墙防渗漏施工技术（Construction technology of exterior wall seepage prevention for high rise building） 1 Preface With the continuous development of high-rise residential building construction technology, the quality level of high-rise buildings has been improved. But at present due to cracks in the wall, wall frame structure beam column and masonry retaining structure between the cracks caused by the wall leakage, leakage, seepage, windows and doors and windows wall junction finishes bulk leakage not only affects the housing function and service life, but also seriously affect the appearance of the building, and to repair caused great this is mainly due to difficulties in the construction of exterior wall leakage is not strict quality control and construction of anti leakage technology is not in place due to. Here, this article will mainly from the high-rise building exterior wall leakage reasons, high-rise building exterior wall seepage prevention construction technology to discuss these two aspects, for reference. 2, high-rise building exterior wall leakage reasons 2.1, the wall of its own cracks (1) because the concrete in the shear wall is not compacted in the process of pouring, the concrete density is not enough, so as to form a leakage passage. (2) due to the construction technology of wall plate at the same time, pouring concrete wall, not to set aside enough time to heavy, heavy heavy enough wall cracks appear. (3) in the concrete curing, only pay attention to water conservation concrete wall, and not enough external wall maintenance, especially in the hot summer will lead to internal and external wall temperature and cracks on the wall; in addition, the maintenance duration is not enough, resulting in concrete shrinkage cracks. 2.2 cracks in the plastering layer of the exterior wall For high-rise buildings, the construction is difficult to accurately control the verticality of the leveling plastering exterior wall in the part thickness is too large (often mor