外墙保温施工工艺（External wall thermal insulation construction technology）.docVIP

外墙保温施工工艺（External wall thermal insulation construction technology） Construction technology of exterior insulation.Txt37 sincere wine, the longer the year more mellow thick; sincere is the fireworks, blooms in the high place beautiful flowers; sincere, send to people, there is hand. Construction technology of exterior wall external thermal insulation system (polystyrene board, glass fiber mesh cloth, polymer mortar method) I. overview of building energy efficiency Take the necessary measures of building energy saving, can greatly reduce building energy consumption for heating and air conditioning, the modern people in the premise of economic and low energy consumption. Under the comfort of the living environment, so that more non renewable resources for future generations, it is of far-reaching significance. Exterior wall insulation system has been widely recognized as one of the most effective measures for building energy efficiency. At the same time, it is also a powerful means to improve the atmospheric environment and give full play to the investment efficiency. Exterior insulation is used as insulation material to the whole building up, cut off the cold bridge, reduce the invasion of wind and moisture, air, heat preservation has double effect of heat insulation, and the protection of architectural structure. Two, general provisions External wall heat transfer coefficient and thickness of polystyrene board The calculation of heat transfer coefficient of exterior wall and the selection of thickness of polystyrene board should be in accordance with the relevant provisions of civil energy conservation design standards (heating residential building part) and civil building thermal design code. Window insulation Doors and windows should be properly insulated side of the hole (such as affixed to thin polystyrene board, or polystyrene particles, etc.). Sill panels shall be in accordance with safety requirements. Should be strictly in accordance with the design requireme