平弯钢化炉技术规格说明书（Technical specification for flat bending tempering furnace）.docVIP

平弯钢化炉技术规格说明书（Technical specification for flat bending tempering furnace） QX-GTFB3655S-CV Technical specification for convection flat / bent tempering furnace Model and specification QX-GTFB3655S-CV convection flat / curved glass tempering furnace Introduction to use and process The machine is mainly used for producing large size flat / bent tempered glass and other uses of glass. It is mainly composed of seven parts: arranging plate table, heating area, bent section strengthening area, flat section strengthening area, unloading platform, blowing system and electric control system. The normal layout of horizontal flat bending tempering furnace is flat and curved. The reinforcing wind bars are located at both ends of the heating zone respectively. When the bent glass is produced, the glass enters the furnace through the flat section strengthening area from the row plate table, and the heating zone is heated and reaches a certain temperature, and then is quickly discharged into the bent section roller table to form and strengthen. When the flat tempered glass is produced, the glass is poured into the furnace from the other end, and the flat air grille is discharged after being discharged to carry out tempering. The structure of the machine is characterized by bidirectional traveling, which greatly improves the quality of the glass. Technical and production parameters To this machine power value Power supply form: three-phase four wire system, 380V, /50Hz Power supply capacity: no less than 1400KVA Total power 1732kW Heating rating 1200kW Rated power of fan 250+250kW Other 32kW The size or glass processing Thickness of processed flat glass: 4-19MM Processing flat glass maximum range: 3660*3660 4mm glass 3660*5500 5-19mm glass Largest size of processed flat glass: 1000*2000mm-----4mm 1500*2500mm-----5mm 2000*3500mm-----6mm 3660*5500mm-----8-19mm Minimum size of processed flat glass: 100*300 Production of bent glass, glass thickness: 6-19mm The production of curved glass