水泵选型13716(Water pump type selection 13716).docVIP

  • 5
  • 0
  • 约1.54万字
  • 约 14页
  • 2017-10-06 发布于河南
  • 举报

水泵选型13716(Water pump type selection 13716).doc

水泵选型13716(Water pump type selection 13716)

水泵选型13716(Water pump type selection 13716) First, the principle of pump selection 1, meet the flow and lift requirements; 2, pump unit in long-term operation, the pump work efficiency is the highest; 3, according to the selected pump type and number of water pump station design, equipment and construction requirements of the minimum investment; 4, easy operation and maintenance, less management costs. Two, selection methods and steps 1. Determine the flow and lift of the pump; 2, pump type primaries: according to the water pump type spectrum; 3, check the work point; 4, determine the pump type. Three, the main basis for pump selection The main basis of pump selection is the required flow rate, lift and its changing law. Determine the design flow of the first pumping station, there are two possible basic conditions: 1. level pumping station: pumping station takes water from water source and supplies it to water purification structure. In order to reduce the size of water intake structures, water pipelines and water purification structures, capital construction investment is saved, In this case, the pump in the first class pumping station is usually required to work uniformly day and night, so the design flow of the pumping station should be: Type 1: flow rate supplied by pump in Qr - level pumping station (m3/h); Qd - maximum daily water supply (M / D); Alpha - the coefficient added to the leakage of the water pipe and the water itself of the purified water structure, Usually take alpha =1.05~1.1; T - working hours for first class pumping stations within a day and night. In the first stage pumping station, the pump head is determined according to the working conditions of the adopted water supply system. Pump head required press down calculation: H, =HsT+, sigma, hs+, sigma, HD Pump head of H - pumping station (m); HsT static head adopts the minimum water level (or minimum moving water level) of suction well and the difference of water mark (m) between purified struc

您可能关注的文档

文档评论(0)

1亿VIP精品文档

相关文档