ANSYSFLUENT中文培训教材PPT.ppt

* * * * * The demo should include a very quick gambit session. This session will involve the import of a database file, the setting of boundary zone names, and the export of a mesh. We do not want to give the trainees enough knowledge at this point on how to generate geometry or mesh. The purpose of this step is to provide a connection between the names of the boundaries assigned in gambit to the names of the boundaries in fluent. Discuss items 2 and 3 on the previous slide when in gambit. Discuss items 4 - 7 when in fluent. Assume the customers are relatively new to CFD- try not to refer to terminology that has not yet been introduced. Remember to: 1. Discuss layout of gui (working from left to right), 2. Show the grid early in the demo, 3. Scale grid, 4. Show boundary names, 5. Discuss default settings of models and properties, 6. Show several post-processing features. It is not necessary to point out all models or capabilities at this time. It will be brought up in later lectures. This slide is meant to be an overview of this lecture and relates steps 4 - 7 discussed in the Intro to CFD analysis to actions in the fluent GUI. Obviously, some of the actions have their own dedicated lectures. This lecture covers the rest. To end the lecture, this single slide was included to make the users aware that they can run the solver in parallel. The intention of this slide is to make them aware of this functionality and the fact that the mesh has to be partitioned. You should not go into the details of the different ways a mesh can be partitioned. They should have seen most of this in the demo. Now some of it can be reviewed here as well as the concepts of shadow-wall and default-interior. This slide was taken from the Tgrid lecture. Here the grid structure is formally defined; necessary to make later discussions clear. The mechanics of using grid adaption is discussed here. When to use it is still in the Solvers lecture. 材料库 FLUENT 中的材料库 提供一系列预先定义的流体、固