变形镁合金疲劳性能的研究进展.pdfVIP

130 材料导报: 综述篇 2010 年9 月( 上) 第24 卷第9 期 * 1, 2 1 2 1 甄 睿 , 方信贤 , 孙扬善 , 杨 雪 ( 1 , 211167; 2 , 211189) 总结了近年来变形镁合金疲劳性能的最新研究进 , 指出夹杂孔洞和刀痕促进变形镁合金疲劳裂纹 的萌生, 采用合适的整体( 包括合金化形变强化和热处理) 和表面( 包括喷丸滚压和涂层) 改性技术是改善变形镁合 金疲劳性能的重要途径此外, 加载频率腐蚀性介质类型及pH 值等对变形镁合金的疲劳性能也有重要影响最 后, 根据变形镁合金疲劳性能的研究现状指出了今后的研究方向 Progress in Research on Fatigue Behavior of Wrought Magnesium Alloys 1,2 1 2 1 ZHEN Rui , FA NG Xinxian , SU N Yangs an , YANG Xue ( 1 Sc ool of Material Engineering, Nanjing Institute of Tec nology , Nanjing 211167; 2 Sc ool of M aterials Science and Engineering, Sout east Universit y, Nanjing 211189) Abstract Researc progress in t e fat igue of w roug t magnesium alloys in recent years is summarized. Inclu sion, cavities and tool marks will promote t e fatigue crack initiat ion of wroug t magnesium alloys. T e strengt ening met ods can be used to t e quality improvement of t e w ole ( alloying, distortion strengt ening and eat treat ment) and surface modified tec nique ( s ot peening, rolling and surface coatings) . T e factors t at influence t e fat igue be avior of w roug t magnesium alloys can also be given from several aspect s of load frequency , aggressive medium and pH value. In addition, t e prospect of fatigue properties observation of wroug t magnesium alloys is discussed as well. Key words w roug t Mg alloys, fatigue be avior, influence factors, strengt ening met eds , , [ 4] Mayer , ( AZ91HP AM60H P) , 21 , [ 1] , , , , , , , ( 1 )[ 4,5] ,