NEUMO德国诺盟有限公司-诺戈(上海)贸易有限公司.PDF

NEUMO 德国诺盟有限公司 Aseptic Shell and Tube Heating Exchanger 无菌管式换热器 A Company of the NEUMO-EHRENBERG-GROUP 诺盟 - 艾仁贝戈集团成员之一 NEUMO Pharmaceutical heat exchangers A flexible design to meet most operating requirements NEUMO has many years experience in the design and manufacture of sterile shell and tube heat exchangers for pharmaceutical, biotechnology and other ultra-pure industries, incorporating the principles and standards specified in ASME BPE 1997. Tailored to your requirements NEUMO heat exchanger incorporate double tube-plates at each end to ensure that the heating chamber is isolated, thus preventing any possibility of mixing and contaminating the processed products with the heating media. NEUMO double tubesheet heat exchanger is specially constructed for the greatest possible separation between the primary and secondary media, with fully drainage on the product side, and therefore suitable for CIP/SIP applications where components must meet FDA regulations. Neumo heating exchangers can be designed flexibly to reach highest capacity with less flow rate though adjustment of seamless tube length and number. Even under strict thermal transfer working condition, 2-path execution of aseptic heat exchanger can be provided and installed in horizontal or vertical type. To avoid stress cracking caused by differential expansion rates, the outer housing of the heating/cooling chamber is fitted with a flexible stainless steel below section, guaranteeing operational safety and long life. Neumo heating exchangers are optimized for cleaning, inspection and maintenance, meet requirements of FDA regulation, and with TÜV, ASME, Chinese pressure vessel manufacture Licensing … etc certifications. 诺盟无菌换热器 诺盟公司在双管板无菌管壳式换热器的设计及制造方面经验丰富，产品被广泛应用于生物制药，超洁净等工业领域。 根据客户的要求进行设计 诺盟公司的双管板无菌管壳式换热器，采用无菌化设计，彻底避免交叉污染。由同心的内管和外套管组成, 冷热流体分 别在内管和套管环隙中流过的同时进行传热，即间壁式换热, 冷热流体各走各的通道，不相混合，保证卫生清洁。适合 CIP/S