变压器用比率差动继电器.PDF

誘導型 變壓器用比率差動繼電器 Ratio Differential Relay (87T) TYPE TDR-C5 (固定型：Fixed Type) TYPE TDR-CD5 (抽出型：Drawout Type) The relay is an induction disk type with three electromagnets. One of the electromagnets is the operating element and the other are two restraint elements. The operating coil is connected to the neutral point of the restraint coils. The operating element produce operating torque which rotates the disk in such direction as to close main contact while the restraint elements produce the restraining torques which rotate the disk in such direc- tion as to open main contact. Normally, the secondary current of the current transformer in the relay are in balance and no current flows in the operating coil. As a result, main contact are kept open by the to torque of the current flowing through the restraint coils. In case of an internal fault, the balance is broken and a differential current flow in to the operating Coil. If the differential current flows over a certain level, the torque of operating coil exceeds that of the restraint coil, and then the main contact closes and relay operates. In case of an external fault, the torque of the restraint coils in such direction as to open the main contact increases in proportion to the fault current, but a small differential current resulting from difference of the excitation characteristics between two current transformers, flows only into operating coil, Therefore the main contact remains open. SPECIFICATION Type Tap Rating Current ICS Unit(DC) Figure Weight(kg) TDR - C5 1.0A Non - drawout ≒3.6 35, 50, 75, 100, 125(%) 5A TDR - CD5