如何写关于温湿度检测的外文翻译论文范文.docVIP

　　如何写关于温湿度检测的外文翻译论文范文 如何写关于温湿度检测的外文翻译论文范文 导读：1班2009010551讲师系（院）物理与电子科学系专业电子信息科学与技术班级董乃旭李洁学生姓名指导教师学号职称滨州学院教务处二〇一三年三月AnAutomaticMeasuringSystemBasedonAtmosphericalMeasurementUsedforTemperatureRelayFortemperaturerelay,itisveryimportanttomeasureitstemp 滨 州 学 院 毕业设计（论文）开题报告 题 目 基于单片机的粮库温湿度智能检测系统的研究 年级2009 级 1班 2009010551 讲师 系 （ 院 ） 物理与电子科学系 专 业 电子信息科学与技术 班 级董乃旭 李 洁 学生姓名 指导教师 学号 职称 滨州学院教务处 二〇一三年三月 An Automatic Measuring System Based on Atmospherical Measurement Used for Temperature RelayFor temperature relay, it is very important to measure its temperatures for action and reversion. In this paper, anautomatic measuring system based on atmospherical measurement is discussed, ple andprecise in practical application. In atmospherical measurement, it is crucial to design a favorable temperaturefield. The resistance stove is designed for simulating temperature field. The even temperature is improved bylong-time -up and placing orifice-board in testing room. According to the enactment controlling temperature curve, the algorithm of fuzzy control is used to control the temperature in temperature field. The regulating voltage mode of double-direction Bi-directional thyristors is used for controlling temperature. The system consists of the console and the resistance stove，and the console includes soft and hard. In this system, The method of grouping the resistance wire of resistance stove according to 3 4 5 6 7 8 9 10 如何写关于温湿度检测的外文翻译论文范文 导读：ition,peraturerelay,itisveryimportanttomeasureitstemperaturesforactionandreversion.Butinthecurrentmanufacture,themanualmeasuringmethods,suchasspot-checkmethod,me the poance of resistance stove is improved based on this method. The measuring precision is improved by using the minimum tultiplication to calibrate the error. At present, the system has been practically applied in manufacture, y benefit and perature relay is one of mon relays, perature arrives at the given temperature. The temperature relay performs lots of functions, such as