汉译英部分(全)的.doc

汉译英部分 第一课 等截面Constant cross section，单位面积上的力Unit area on the force杆件的横截面面积A cross-sectional area of the member横截面的形心Centroid of the cross section单位长伸长量Elongation per unit length相邻横截面Adjacent cross-section除非另有说明Unless otherwise noted 力的集度。即是单位面积上的力，称为应力The force set degrees, that is the force per unit area, known as stress 应力常用希腊字母@来表示Stress commonly used Greek letters @ 单位长度的伸长量称为应变，常来以下公式确定Unit length of elongation is called strain, often to the following formula to determine 材料力学是应用力学的一个分支The materials mechanics is a branch of applied mechanics 材料力学讨论固体在承受各种荷载时的性能Of Material Mechanics Discussion solid performance under various loads 第二课 临界应力Critical stress欧拉公式Eulers formula 比例极限Proportional limit强度极限Strength limit非弹性屈曲Inelastic buckling平均压应力Average compressive stress回转半径Radius of gyration许可应力Allowable stress 我们注意到临界应力的变化和柱子长细比的平方成反比We note that the critical stress changes and pillars slenderness ratio is inversely proportional to the square of 如果，柱子将由于弹性屈曲而失效，欧拉公式可以应用If, pillars elastic buckling failure.Eulers formula， 曲线ABC是根据公式2-1绘制的，被称为欧拉曲线 Curve ABC is according to the formula 2-1 draw, is called the eulers curve 结构工程安全系数的典型值介于1.5和3这一范围内。The structural engineering typical value of the safety factor of between 1.5 and 3 within this range 第三课 温度差Temperature difference 补救措施Remedial measures 补安全度规范Complement safety norms， 雨水积聚 Rainwater accumulation 概率密度函数Probability density function 概率曲线 Probability curve 失效概率Probability of failure 分项安全系数Partial safety factors 结构必须具备抗破坏的安全度和实用时的实用性The structure must have anti undermine the security and practical usefulness 作用在结构上的荷载可分为三大类。Effect on the structure of the load can be divided into three categories. 像活荷载一样，某时刻的环境荷载无论大小还是分布都是不确定的 Like live load, a time of environmental load regardless of size or distribution is uncertain 规定值并不是平均值，而是表示期望的上限Specified value is not mean, but expects the upper limit 设计规范中合理的安全条款已经取得了很大进展。code of reasonable safety terms have been made great progress. 由此可看出，这个规定的使用荷载比作用在结构上的平均荷载大得多。This can b