基于ansys的pdc钻头钎焊裂纹应力场和应力强度-煤田地质与勘探.pdfVIP

第43 卷 第1 期 煤田地质与勘探 Vol. 43 No.1 2015 年2 月 COAL GEOLOGY EXPLORATION Feb. 2015 文章编号: 1001-1986(2015)01-0104-05 基于ANSYS 的PDC 钻头钎焊裂纹应力场和 应力强度因子分析 唐胜利，杨 亮，孙利海 (西安科技大学地质与环境学院，陕西 西安 710054) : 金刚石复合片(PDC)钻头钎焊裂纹尖端两侧临近界面处应力高度集中，是导致其断裂失效的主 要原因。基于ANSYS 对PDC 钻头钎焊裂纹进行数值模拟，针对焊缝裂纹形状、厚度、位置的不同， 能对裂纹尖端应力场等值线图及应力强度因子进行数值计算。借助这一计算 PDC 焊缝裂纹应力强度 因子的新方法，阐述了PDC 断裂失效机理，用以指导钻头焊接工艺，稳定和提高 PDC 钻头焊接质量。 ：ANSYS ；PDC ；钎焊裂纹；应力强度因子 ：TE421 ：A DOI: 10.3969/j.issn.1001-1986.2015.01.022 ANSYS-based analysis on stress field and stress intensity factor of brazing seam in PDC bits TANG Shengli, YANG Liang, SUN Lihai (College of Geology Environments, Xian University of Science Technology, Xian 710054, China) Abstract: Highly concentrated stress near the interface on both sides of brazing seam tip is the main reason for fracture failure of polycrystalline diamond compact (PDC) bits. On the basis of ANSYS, numeric simulation was conducted for brazing crack of PDC bit. Aiming at different shape, thickness and position of brazing seam, stress field contours and stress intensity factors were calculated at the tip of cracks. With aide of this new method for calculation of stress intensity factor, the paper described the mechanism of PDC fracture failure to guide the weld- ing process, stabilize and improve the quality of welding PDC bits. Key words: ANSYS; PDC; brazing crack; stress intensity factor (PDC) ANSYS 1:1 1a 90% PDC 1b PDC