基于单片机的简易电子表9.docVIP

基于51单片机的简易电子表 /***************************************************************** 阿斌独家制作: 电子表 1602液晶显示 带有闹钟功能 每天到指定时间后闹钟提醒 闹钟响后按s4键关闭闹钟 如果闹钟响后大约20秒未检测到s4键按下，则闹钟自动关闭 ******************************************************************/ #includereg52.h #define uchar unsigned char #define uint unsigned int sbit lcden=P2^2; sbit lcdrw=P2^1; sbit lcdrs=P2^0; sbit s1=P3^0; sbit s2=P3^1; sbit s3=P3^2; sbit s4=P3^3; sbit rd=P3^7; sbit beep=P1^2; uint nian,a; uchar count,s1num,i,xq,ri,yue,flag; char shi,fen,miao,shia,fena,miaoa; uchar code table[]= 2012-11-19 MON; uchar code table1[]= 00:00:00; uchar code xq1[]=MON; uchar code xq2[]=TUE; uchar code xq3[]=WED; uchar code xq4[]=THU; uchar code xq5[]=FRI; uchar code xq6[]=SAT; uchar code xq7[]=SUN; void delay(uint z) { uint x,y; for(x=z;x0;x--) for(y=110;y0;y--); } void didi() { beep=1; delay(5); beep=0; delay(5); beep=1; delay(5); beep=0; delay(5); } void write_com(uchar com) { lcdrs=0; lcden=0; lcdrw=0; P0=com; delay(5); lcden=1; delay(5); lcden=0; } void write_date(uchar date) { lcdrs=1; lcden=0; lcdrw=0; P0=date; delay(5); lcden=1; delay(5); lcden=0; } void init() { uchar num; lcden=0; xq=1;ri=19;yue=11;nian=2012; a=1000;flag=0; shia=00;fena=00;miaoa=05; write_com(0x38); write_com(0x0c); write_com(0x06); write_com(0x01); write_com(0x80); for(num=0;num16;num++) { write_date(table[num]); delay(5); } write_com(0x80+0x40); for(num=0;num12;num++) { write_date(table1[num]); delay(5); } TMOD=0x01; TH0=(65536-50000)/256; TL0=(65536-50000)%256; EA=1; ET0=1; TR0=1; } void write_sfm2(uchar add,uint date) { uchar qian,bai,shi,ge; qian=date/1000; bai=date%1000/100; shi=date%100/10; ge=date%10; write_com(0x80+add); write_date(0x30+qian); write_date(0x30+bai); write_date(0x30+shi); write_date(0x30+ge); } void write_sfm1(uchar add,uchar date) { uchar shi,ge; shi=date/10; ge=date%10; write_com(0x80+add); write_date(0x30+shi); write_da