MT228-2005重量法煤中碳氢测定仪通用技术条件.pdfVIP

ICS 73.040 D 21 备案号 :15496- 2005 MT 中华 人 民共 和 国煤 炭 行 业标 准 MT/T228 2005 代替MT/T228-1990 重量法煤中碳氢测定仪通用技术条件 Generalspecificationforcarbonandhydrogenanalyzer- Gravimetricmethod 2005-02-14发布 2005-06-01实施 国家发展和改革委员会 发 布 MT/T 228- 2005 目 次 前言 ················································································································…… II 1 范 围 ·······························。·······。·······················，········，······························…… 1 2 规范性引用文件 ·······································，··················，·······，，················，··········……1 3 技术要求 .·1 4 试验方法 ······················，······························································，··················…… 2 5 检验规则 ····································································································…… 4 6标志、包装、运输和贮存 ·····‘·································································，···········…·…5 MT/T 228-2005 月A 舀 本标准是参照GB/T476((煤的元素分析方法》，对MT/T228-1990的修订。 本标准自实施之日起，代替MT/T228-1990((煤中碳氢测定仪技术条件》。 本标准与MT/T228-1990相比主要变化如下: — 炉膛工作温度作了技术改变(1990版的3.3.2;本版的3.3.2); — 燃烧管和U形吸收管气密性检查方法作了技术改变(1990版的4.1和4.6;本版的4.1); — 增加了对测定仪精密度、准确度的要求，并相应给出了测定仪精密度、准确度的试验方法(见 3.5,4.6); — 抽样和判定规则有所改变(1990版的5.2.2和5.2.3;本版的5.2.2和5.2.3), 本标准由中国煤炭工业协会科技发展部提出。 本标准由全国煤炭标准化技术委员会归口。 本标准起草单位:煤炭科学研究总院煤炭分析实验室。 本标准主要起草人:秘洁芳、陈爱莉。 本标准所代替标准的历次版本发布情况为: — MT/T 228- 1990. MT