黄土表面吸附结合水的类型和界限划分_王铁行.pdfVIP

DOI 10.11779/CJGE201405019 0.59 0.590.98 02.70% 2.70%6.61% 125 245 65 125 TU444 A 2014 (1968) E-mail: wagntx@xauat.edu.cn Types and boundaries of bound water on loess particle surface WANG Tie-hang, LI Yan-long, Su Li-jun (College of Civil Engineering, Xi′an University of Architecture Technology, Xi′an 710055, China) Abstract: The objective of this study is to divide the types and boundaries of bound water on loess particle surface and to investigate their related physical and mechanical properties using the isothermal adsorption and thermogravimetric analyses. The results indicate that the water formed from the water vapor adsorbed on a loess particle with the relative humidity less than 0.59 is the strong bound water, and the water formed from the water vapor adsorbed on a loess particle with the relative humidity of 0.59 ~ 0.98 is the weak bound water. The absolute water content boundaries of the strong bound water and weak bound water are 02.70% and 2.70%6.61% respectively. The thermo-gravimetric intervals of the strong bound water and weak bound water are 125 245 and 65 125 respectively. The hydrous specific gravity of hydrated loess and the density of the bound water decrease with the increase of the absolute water content. The volume of hydrated loess, volume of the bound water and thickness of the combined water film increase with the increase of the absolute water content. Key words: loess; bound water; isothermal adsorption; thermogravimetric analysis; relative humidity