异地协同设计系统管理及模型传输模块的开发.doc

硕 士 学 位 论 文 异地协同设计系统管理及模型传输模块的开发 Development of the Management Module and the Model Transmission Module in Collaborative Design System 作 者 姓 名： 孙广远 学科、 专业： 机械电子工程 学 号： 指 导 教 师： 高航 教授 完 成 日 期： 2008-12-05 大连理工大学 Dalian University of Technology  大连理工大学学位论文独创性声明 作者郑重声明：所呈交的学位论文，是本人在导师的指导下进行研究工作所取得的成果。尽我所知，除文中已经注明引用内容和致谢的地方外，本论文不包含其他个人或集体已经发表的研究成果，也不包含其他已申请学位或其他用途使用过的成果。与我一同工作的同志对本研究所做的贡献均已在论文中做了明确的说明并表示了谢意。 若有不实之处，本人愿意承担相关法律责任。 学位论文题目： 作者签名： 日期： 年 月 日 摘 要 异地协同设计系统可供不同地域、不同公司、不同部门的设计人员对产品进行协同的设计开发，从而使研制周期大幅缩短。而对参与协同设计人员的有效管理是实现高效协同设计的基础。另外，三维设计模型的快速精确传输，对于协同设计平台的同步性起到了至关重要的作用。本文基于上述原因并结合总装备部“十一五”重点预研项目**异地协同设计制造网络平台关键技术Development of the Management Module and the Model Transmission Module in Collaborative Design System Abstract Collaborative Design System (CDS) allows designers from different regions, corporations and departments to design and develop a product at the same time, so that it shortens the development cycle to a great extent. Effective management of the designers involved in the co-design is a basic to achieve efficient co-design. In addition, rapid and accurate transmission of the three-dimensional designed model plays a crucial role in the synchronization of CDS. The following two main tasks have been achieved in this paper based on these above-mentioned reasons and the General Armament Department’s 11th Five-Year important pre-project study: ** key technology of distributed collaborative design and manufacture network platform: (1) An Organization Model in the Collaborative Design Workflow Management is established, and the Java Web is designed and developed using Struts framework based on MVC. The function development of Staff Management Sub-Module in the Workflow Management Module is completed, and the management of corporations, departments, staff, projects and roles of the CDS is re