td型斗提机使用说明书(en).pdfVIP

TD 型 胶 帶 斗 式 提 升 機 Undulated baffle belt conveyor 安装使用说明书 Installationmanual 芜湖起运机械制造有限公司 T:0550-3913166 F：0553-3913168 目 录 Head record 1、工作原理及主要结构特征Summary 2、主要技术参数Main technical parameters 3、产品结构特点及外形尺寸The characteristics of product structure and dimensions 4、安装、调试Installation, commissioning 5、使用与维护保养Use and maintenance 6、 润滑Lubrication 7、备品配件表Spare parts list 8. 随机文件Random file 一、工作原理及主要结构特征The working principle and main structure feature TD型胶带斗式提升机主要由下列几部分组成：驱动装置；上部区段；中部 机壳；料斗及胶带；下部区段；检修平台等。TDtypebeltbucketelevatormainly consists of the following severalparts: drive device; an upper section; middle casing;thehopper and thetape;a lowersection;repairplatform. 1、驱动装置Driving device 驱动装置是由轴装式电机减速机 （KA型）或电机、减速机 （ZLY型或ZSY 型）、逆止器、联轴器组成。根据输送量、物料特性及提升高度选择。Driving device iscomposed of a shaftmounted motor reducer (KA type ) ormotor, reducer (ZLY or ZSY), backstop, coupling. According to the conveying capacity, material properties and lifting height selection. 2、上部区段The upper section 上部区段由传动滚筒组，上部机壳、左右半罩等组成。The upper section ofthedrivingdrumgroup,anupperhousing,a leftandarighthalfcover. 3、中部机壳Middle casing 中部机壳有三种不同的高度（2米、2.5米、3米），供组合提升机高度选择。 备有检视门的中部机壳；每隔8～12米，备有一节带有挡板的中部机壳，以防止 料斗在运行过程中相互碰作撞。The central case there are three different heights (2 meters, 2.5 meters, 3 meters ), for the combination of hoist height selection. With the view of the middle casing door; at intervals of8to 12meters,with a sectionwith thecentralpartofthebaffleplate shell, in order to prevent the hopper in the running process of the touching each other as hit. 4、料斗及胶带Hopper and adhesive tape 胶带采用高强度的输送带 （EP或NN型），料斗采用Q235钢板压制，用胶带 螺钉 （DIN15237）与胶带连接。Adhesivetapewithhighstrengthconveyorbelt (EP orNN ), hopper used Q235 plate pressing, tape screw (DIN15237) and