Linux在上的移植之触摸屏驱动.docVIP

嵌入式Linux之我行，主要讲述和总结了本人在学习嵌入式linux中的每个步骤。一为总结经验，二希望能给想入门嵌入式Linux的朋友提供方便。如有错误之处，谢请指正。 共享资源，欢迎转载： 一、移植环境 主 ?机：VMWare--Fedora 9 开发板：Mini2440--64MB Nand 编译器：arm-linux-gcc-4.3.2 二、移植步骤 1. 准备驱动源码。因为linux-内核中没有提供合适的ADC驱动和触摸屏驱动，所以这里就直接用友善提供的驱动 ? s3c24xx-adc.h #ifndef _S3C2410_ADC_H_#define _S3C2410_ADC_H_#define ADC_WRITE(ch, prescale)????((ch)16|(prescale))#define ADC_WRITE_GETCH(data)????(((data)16)0x7)#define ADC_WRITE_GETPRE(data)????((data)0xff)#endif /* _S3C2410_ADC_H_ */ mini2440_adc.c #include linux/errno.h#include linux/kernel.h#include linux/module.h#include linux/slab.h#include linux/input.h#include linux/init.h#include linux/serio.h#include linux/delay.h#include linux/clk.h#include asm/io.h#include asm/irq.h#include asm/uaccess.h#include mach/regs-clock.h#include plat/regs-timer.h???? #include plat/regs-adc.h#include mach/regs-gpio.h#include linux/cdev.h#include linux/miscdevice.h#include s3c24xx-adc.h#undef DEBUG//#define DEBUG#ifdef DEBUG#define DPRINTK(x...) {printk(__FUNCTION__(%d): ,__LINE__);printk(##x);}#else#define DPRINTK(x...) (void)(0)#endif#define DEVICE_NAME????adcstatic void __iomem *base_addr;typedef struct {????wait_queue_head_t wait;????int channel;????int prescale;}ADC_DEV;DECLARE_MUTEX(ADC_LOCK);static int OwnADC = 0;static ADC_DEV adcdev;static volatile int ev_adc = 0;static int adc_data;static struct clk????*adc_clock;#define ADCCON (*(volatile unsigned long *)(base_addr + S3C2410_ADCCON))????//ADC control#define ADCTSC (*(volatile unsigned long *)(base_addr + S3C2410_ADCTSC))????//ADC touch screen control#define ADCDLY (*(volatile unsigned long *)(base_addr + S3C2410_ADCDLY))????//ADC start or Interval Delay#define ADCDAT0 (*(volatile unsigned long *)(base_addr + S3C2410_ADCDAT0))????//ADC conversion data 0#define ADCDAT1 (*(volatile unsigned long *)(base_addr + S3C2410_ADCDAT1))????//ADC conversion data 1#define ADCUPDN (*(volatile unsigned long *)(base_addr + 0x14))?