施工升降机超载保护器 英文.docVIP

Foreword Thank you for purchasing and using the companys series of products. SC-1 construction lifter overload protector (hereinafter referred to as SC-1) is an advanced overload protector specially designed for the construction lifter technology. Through acquisition of signals from top of the crane cage and operation amplification and processing, it compares the result with the rated load of the crane cage. In this way, it controls the lifting load of the crane cage and reduces the human accidents to the utmost. SC-1 provides you with rich and strong function: High-precision weighing chip ensures the accuracy of the real-time load, and displays value of up to two decimal places The unique Time Delay function could completely eliminate the influence of impact on the accuracy of actual load. Brief and clear data reading software and the current mainstream USB 1.0 communication technology make the output of the overload information very easy. Quality and reliable connector technology really realizes the zero wiring of product installing. Reliable password control function which effectively prevents the super power authorized parameters change. The large capacity memory chip which could store up to 30,000 overloads records. Configurable hoist of rated crane enables a much better generality and interchangeability of the product. SC-1 construction lifter overload protector user manual Safety Caution Safety labels: Danger: Incorrect use which may cause fire or serious casualties and even deaths. Attention: Incorrect use which may cause personal moderate damage or slight injuries or equipment damage Receiving inspection Attention If find out the damage of overload protector, then stop installation, or it may cause accident. Installation Attention When handling and installing the product, please hold the whole product with both hands instead of just lifting a foot or an edge in case of falling down and causing damag