传统研磨加工内容及工艺.docVIP

毕 业 设 计（论文） 题 目：传统研磨加工内容及工艺 姓 名： 编 号： 摘要 ABSTRACT Three months to finally the collection of graduation design, off somewhat grinding is my first job, so I could be simpler, information collected in the training materials and network can find comparison system and perfect knowledge, but this is not the most important, the most important is I collected to strengthen in the traditional grinding understanding of the contents, thereby better and in combination with practice, for his own career planning and technical growth send send dongfeng, this is the purpose of doing this graduation design! During this time, I combined with department heads foxconn we die training materials and their provided in network database collect grinding content common sort out these, traditional grinding notice especially precision and simple, basically besides cant section four parts, no bad arc what content, but on this basis processing error are 0.002 mm, this is automatic semi-automatic grinder can achieve a precision, automata error in 0.1 mm differ 50 times, so do the simple and difficult, and among them fine slot for arc cant pp.207-216 pick arc is complicated, but now in operation and deepen the understanding finishing in the later work may be little take some detour! Sorting out material basically covers the entire content of the traditional grinding, because its content, but not really high technical operation requirements of these is the key, Ill traditional grinding profound understanding these material in the later processing let oneself grow faster, this is my conclusion my purpose! Keywords: precision, simple, 0.002 mm, operation Paper types: the application of basic research 目录 第1章 传统研磨机（JL—618）简介 1 第2章 基础成形研磨 5 2.1 ?斜面成型 5 2.1.1斜面砂轮的修整 5 2.1.2斜面成型方法 6 2.2段差成型 8 2.2.1段差种类： 8 2.2.2砂轮侧面的修整方法： 8 2.2.3研磨段差的方法： 8 2.2.4粗加工（粗切） 9 2.3直槽成型 10 2.3.1直槽砂轮成型砂轮的修整 10 2.3.2研磨直槽的方法 11 2.4 细槽成型 13 2.4.1细槽的定义 13 2.4.2细槽砂轮的修制 13 2.4.3细槽成型的方法 14 2.5 特殊槽的