保证转体桥滑道球铰安装精度控制措施.docVIP

保证转体桥滑道球铰安装精度控制措施 　　摘 要: 本文结合工程实例，详细叙述了廊涿高速公路跨京广铁路、107国道大桥主墩在安装转体系统中滑道与球铰的精度控制措施。在滑道及球铰安装过程中，为使转体桥在转动过程中平稳精确的转动到位，严格控制其安装精度。包括滑道安装时，等距分为内外八点利用精密水准仪及微调螺栓精密测控到位；球铰安装时，采用“坐标法”和“十字线对中法”严格控制安装精确度。同时为了强化质量的控制,保证安装精度达到设计要求的各项指标，还对施工过程中遇到问题和难度进行了浅析。通过对转体系统中滑道和球铰安装精度的严格测控，最终达到到转体T构在不留现浇段的情况下顺利合拢的目的，开创了转体桥无现浇段精确合拢的先例，为后来施工的转体桥提供一些有意义的经验和方法。 关键词：转体桥球铰、滑道 安装 精度控制 Abstract: In this paper, the engineering examples Gallery Zhuo highway across Beijing-Guangzhou railway, 107 State Road Bridge main pier installation swivel system the chute with ball hinge precision control measures are described in detail. During rotation in the chute and the ball joint during the installation process, for the swivel bridge smooth and accurate rotation of place, strict control of the mounting accuracy. The chute installed, equidistant divided into internal and external use of precision measurement and control precision spirit level and fine-tuning bolts in place; eight ball joints installed, using the coordinate method and the crosshairs on the Sino-French “strictly control the installation accuracy. Meanwhile, in order to strengthen quality control, to ensure that the installation accuracy of the design requirements of the indicators, but also on the problems encountered in the construction process and difficulty of. Install the accuracy of strict monitoring and control through the chute and ball swivel system hinges ultimately achieve the purpose of twist T configuration successfully closed the case without leaving the cast-in-place segment, creating a the swivel bridge situ segment precise closed precedent for the later construction of the swivel bridge to provide a meaningful experience and methods.Keywords: the swivel bridge ball joints, slide installation precision control U445 一、前言 廊涿高速公路跨京广铁路、107国道大桥是整个廊涿高速公路的工期目标的控制性工程。由于开工日期较晚，再加上需与张石高速公路接轨，因此工期压力很大。此外京广电气化铁路行车密度大，桥下有接触网、铁通、电力、信号等光电缆，施工安全风险大，所以经过北京铁路局的专家和河北省交通厅的相关人员讨论后，一致决定该桥转体T构不留合拢段，给施工技术控制带来相当的困难。由于T构两侧悬臂长各40米，转体后T构梁底钢板高