单片机数字电子钟C程序设计.docVIP

基于51单片机的数字电子钟C程序设计仿真图 /***************************lns主程序snl***************************/#include absacc.h????? //包含头文件#include reg52.h??????? //包含头文件/***************************数据类型定义***************************/#define uchar unsigned char????? //数据类型定义/*************************定义变量并初始化*************************/uchar n=31;???????????????????????????????? //定义月份天数变量并初始化uchar ms=0;???????????????????????????????? //定义毫秒变量并初始化uchar h1=0,m1=0,s1=0;?????????????? //定义计时时、分、秒变量并初始化uchar h2=0,m2=1,s2=1;?????????????? //定义定时时、分、秒变量并初始化 uchar year=7,month=9,day=8;?? //定义年、月、日变量并初始化uchar wday=6;??????????????????????????? //定义星期变量并初始化uchar *h=h1,*m=m1,*s=s1; //定义显视位变量并初始化uchar *p;????????????????????????????????????? //定义调节指针uchar k1=0,k2=0,k3=0,k4=0,k5=0;???? //定义控制变量并初始化uchar counter=0;?????????????????????????????? //定义铃声节拍变量并初始化uchar count=0;?????????????????????????????????? //定义铃声音符变量并初始化sbit sound=P1^0;??????????????????????????????? //定义铃声输出位uchar a[8]={1,2,3,4,5,6,7};???????????????? //定义显视输出位数组并初始化uchar code tt[12]={?????????????????? 0x3f,0x06,0x5b,0x4f,0x66,0x6d,?????????????????? 0x7d,0x07,0x7f,0x6f,0x40,0x00????????????????? };???????????????????????????????????? //数码管显视代码uchar code array[]={???? 0x18, 0x30, 0x1C, 0x10, 0x20, 0x40, 0x1C, 0x10, ????? 0x18, 0x10, 0x20, 0x10, 0x1C, 0x10, 0x18, 0x40, ???? 0x1C, 0x20, 0x20, 0x20, 0x1C, 0x20, 0x18, 0x20,????? 0x20, 0x80, 0xFF, 0x00, 0x20, 0x30, 0x1C, 0x10, ???? 0x18, 0x20, 0x15, 0x20, 0x1C, 0x20, 0x20, 0x20, ???? 0x26, 0x40, 0x20, 0x20, 0x2B, 0x20, 0x26, 0x20, ???? 0x20, 0x20, 0x30, 0x80, 0xFF, 0x00, 0x20, 0x20,???? 0x1C, 0x10, 0x18, 0x10, 0x20, 0x20, 0x26, 0x20,???? 0x2B, 0x20, 0x30, 0x20, 0x2B, 0x40, 0x20, 0x20,???? 0x1C, 0x10, 0x18, 0x10, 0x20, 0x20, 0x26, 0x20,???? 0x2B, 0x20, 0x30, 0x20, 0x2B, 0x40, 0x20, 0x30,???? 0x1C, 0x10, 0x18, 0x20, 0x15, 0x20, 0x1C, 0x20,???? 0x20, 0x20, 0x26, 0x40, 0x20, 0x20, 0x2B, 0x20,???? 0x26, 0x20, 0x20, 0x20, 0x30, 0x80, 0x20, 0x30,???? 0x1C, 0x1