合金状态对单晶高温合金DD6再结晶的影响-中国有色金属学报.PDFVIP

20 7 2010 7 Vol.20 No.7 The Chinese Journal of Nonferrous Metals July 2010 1004-0609(2010)07-1328-06 DD6 ( 100095) DD6 1 100~1 250 4 h 1 200 1 150 γ ′ γ ′γ+γ ′ DD6 TG132.3+2 A Effects of alloy states on recrystallization of single crystal superalloy DD6 XIONG Ji-chun, LI Jia-rong, LIU Shi-zhong, HAN Mei (National Key Laboratory of Science and Technology on Advanced High Temperature Structural Materials, Beijing Institute of Aeronautical Materials, Beijing 100095, China) Abstract: The samples of single crystal superalloy DD6 were grit blasted and heat treated in the temperature range of 1 100−1 250 for 4 h in vacuum atmosphere, then the recrystallizations of as-cast and standard heat treatment DD6 alloys were investigated, respectively. The results show that the equiaxed recrystallization grains nucleate in as-cast samples heat treated at 1 200 , while the equiaxed recrystallization grains occur in the standard heat treatment samples heat treated at 1 150 . The recrystallization region consists of cellular recrystallization and equiaxed recrystallization grains at different states. With the improvement of the heating temperature, the size of cellular recrystallization decreases, while the size of equiaxed recrystallization grains increases, and the coarse γ ′ phase in the cellular recrystallization changes from lamellar to equiaxial. By comparing with the as-cast samples, the standard heat treatmen