IARMSP编译报错说明.docxVIP

IAR MSP430编译报错说明 无编号警告类型： 1、Sat Jun 23, 2012 17:41:05: The stack pointer for stack Stack (currently Memory:0xF5336) is原因：HYPERLINK /s/blog_4c0cb1c0010153l9.html/s/blog_4c0cb1c0010153l9.html ???? IAR相关设置：Tools-Option-Stack-Warn when stack pointer is out of bounds. ? 2、无法查看结构体/共同体/联合体 变量[Syntax error, unexpected $end, expecting COLON2] column 1 ??struct??drpoint??{?????uint16 x;?????uint16 y;???}drpoint[10];? 改成： ??struct?? ??{?????uint16 x;?????uint16 y;???}drpoint[10];? 参考：HYPERLINK /group/lpc2000/messages/34213?threaded=1m=evar=1tidx=1/group/lpc2000/messages/34213?threaded=1m=evar=1tidx=1 ? UESTC 2012.12 ? IAR 各版本BUG错误修正历史???HYPERLINK /pub/efo-ftp/TMP/pub/atmel/_AVR32_MCUs_32bit/Compilers/IAR/IAR_2.20/Install%20software/EWAVR32-KS-CD-220A/doc/common/doc/CorrectedProblems.pdf/pub/efo-ftp/TMP/pub/atmel/_AVR32_MCUs_32bit/Compilers/IAR/IAR_2.20/Install software/EWAVR32-KS-CD-220A/doc/common/doc/CorrectedProblems.pdf 有编号警告类型： ? Error[e16]:?Segment?XDATA_Z?(size: 0x19a1 align: 0) is too long for segment definition. At least 0xe4c more bytes needed. The problem occurred while processing the segment placement command-Z(XDATA)XDATA_N,XDATA_Z,XDATA_I=_XDATA_START-_XDATA_END, where at the moment of placement the available memory ranges were XDATA:f1ff-fd53 Reserved ranges relevant to this placement:XDATA:f000-f1fe XSTACKXDATA:f1ff-fd53 XDATA_NBIT:0-7 BREGBIT:80-97 SFR_ANBIT:a8-af SFR_ANBIT:b8-c7 SFR_ANBIT:d8-df SFR_ANBIT:e8-ef SFR_AN A： 其实这个问题并不是你的程序本身有问题，主要是因为你编写的程序太大了，超出了芯片本身的定义。今天在群里学习了一招，就是将数组定义到code里，我们看一下例子。我们定义一个5100个元素的数组，有以下两种方法： mermaid提出的方法是： typedef unsigned char const __code INT8U; extern INT8U shuzi[5100]; 文晶提出的方法是 INT8U code shuzi[5100]; 这两种方法其实效果是一致的，定义完数组之后，调用的部分就是需要用指针来调用数组里面的数值了。 Error[e16]:?Segment?DATA16_I?(size: 0xa80 align: 0x1) is too long for segment definition. At least 0x27f more bytes needed. Thepro××em occurred while processing the segment placement command-Z(DATA)DATA16_I,DATA16_Z,DATA16_N,HEAP+_HEAP_SIZE=0200-0A00,