FV520B钢激光熔覆镍基合金摩擦学的性能分析论文.docx

FV520B钢激光熔覆镍基合金摩擦学性能分析 本科毕业论文（设计） 题 目 Fv520B钢激光熔覆镍基合金涂层摩 檫学性能分析 FV520B钢激光熔覆镍基合金摩擦学性能分析 摘 要 FV520B不锈钢为特种钢，被广泛使用在对材料表面性能要求较高的地方,尤其是在耐磨性能方面。为提高该材料的耐磨性能，本文采用激光熔覆技术在FV520B钢样片上制备不同激光功率和不同扫描速度下的镍基合金涂层。通过硬度和摩擦系数表征激光熔覆层表面的耐磨性能，并分析了激光功率和扫描速度对熔覆层耐磨性能的影响。研究结果表明，激光功率和扫描速度均会影响FV520B不锈钢表面镍基合金涂层的耐磨性能，当激光功率为2500W、扫描速度为6mm/s时，熔覆层的熔覆效果和耐磨性能最佳。 关键词：FV520B不锈钢；激光熔覆；镍基合金涂层；摩擦性能 ABSTRACT FV520B stainless steel is a kind of special steel, which is widely used in the aspects which have high demandon the surface property of material, especially the wear-resisting property. In order to improve the wear-resisting of the material, this graduation design adopts laser cladding technology to make nickel base alloy coatings of different laser power and different scanning speed on FV520B steel samples. In addition, the influence laser power and scanning speed have on the wear resistance of cladding layer was analyzed by means of hardness, friction coefficient, and the wear-resisting property of the surface of laser cladding layer. The results show that the laser power and scanning velocity will influence the wear-resisting property of nickel base alloy of FV520B stainless steel. When the laser power is 2500W, and scanning speed is 6mm / s, the fusion covering effect of cladding layer and the wear-resisting property will be best. Key words: FV520B Stainless Steel, Laser Cladding ,Nickel Base Alloy Coating ,Friction Property 目 录 TOC \o 1-3 \h \z \u HYPERLINK \l _Toc453065062 摘 要 PAGEREF _Toc453065062 \h III HYPERLINK \l _Toc453065063 ABSTRACT PAGEREF _Toc453065063 \h IV HYPERLINK \l _Toc453065064 目录 PAGEREF _Toc453065064 \h V HYPERLINK \l _Toc453065065 第1章 绪论 PAGEREF _Toc453065065 \h 1 HYPERLINK \l _Toc453065066 1.1 FV520B不锈钢简介 PAGEREF _Toc453065066 \h 1 HYPERLINK \l _Toc453065067 1.2 激光熔覆技术的发展及展望 PAGEREF _Toc453065067 \h 1 HYPERLINK \l _Toc453065068 1.3 镍基合金涂层 PAGEREF _Toc453065068 \h 2 HYPERLINK \l _Toc453065069 1.4 摩擦学性能 PAGEREF _Toc453065069 \h 2 HYPERLINK \l _