全装配式预制混凝土结构梁柱组合件抗震性能试验研究_赵斌.pdfVIP

DOI牶牨牥牣牨牫牨牴牱牤j牣eeev牣牪牥牥牭牣牥牨牣牥牨牬 25 1 　　　　　　　　 Vol. 25, No. 1 2005 2 EARTHQUAKE ENG INEERING AND ENG INEERING VIBRATION Feb. 2005 　　 :1000-1 01(2005)01-0081-07 赵　斌, 吕西林, 刘丽珍 ( , 200092) :、 、、、、、、 。: , 。, 。 :;;;; :P 15. 97;TU 7 　　　:A Experimental study on seism ic behavior of precast concrete beam-column subassemblage w ith fully assembled joint Zhao Bin, LüX ilin, Liu Lizhen (State Key Laboratory for Disaster Reduction in Civil Engineering, Tongji University, Shanghai 200092, China) Abstract:By using the fu l-l scalemodel comparable testmethod, the seism ic behaviors of cas-t in-situ high strength concrete beam-column subassemblage, precast concrete beam-column subassemblagew ith cas-t in-situ high strength concrete joint and precast concrete beam-column subassemblagesw ith fully assembled joints, such as the failure pattern, hysteresis characteristic, skeleton cu rve, strength and stiffness deterioration, sheardeform ation of the joint core zone, rotation of the beam end and column end, w ere studied in thispaper. The resu lts indicates that the pre- cast reinforced concrete beam-column subassemblage w ith cas-t in-situ monolithic joint almost has the same seism ic capacity as the cas-t in-situ reinforced concrete beam-column subassemblage, and the seism ic behaviors of the pre- cast concrete beam-column subassemblagesw ith fu lly assembled joints are quite different from the cas-t in-situ high strength concrete beam-column subassemblage and the precast reinforced concrete beam-column w ith cas-t in-situ monolithic join.t It is suggested that somemeasu res shou ld be taken to add the energy dissipation ab ility of the full