周集煤矿毕业方案说明书.doc

周集煤矿毕业设计说明书 摘 要 本设计的井田面积为15.05平方千米，年产量90万吨。煤层赋存比较稳定，煤层倾角平均14°，平均煤厚4.01m，整体地质条件比较简单，沼气和二氧化碳含量相对较低，涌水量也不大。根据实际的地质资料情况进行井田开拓和准备方式的初步设计，该矿井决定采用双立井单水平上下山开采，煤层采用采区上下山联合布置的开拓方式，设计采用综合机械化一次采全高回采工艺，倾斜长壁采煤法，用全部跨落法处理采空区。并对矿井运输、矿井提升、矿井排水和矿井通风等各个生产系统的设备选型计算，以及对矿井安全技术措施和环境保护提出要求，完成整个矿井的初步设计。矿井全部实现机械化，采用先进技术和借鉴已实现高产高效现代化矿井的经验，实现一矿一面高产高效矿井从而达到良好的经济效益和社会效益。 关键词：立井、倾斜长壁、一次采全高、综合机械化、高产高效 Abstract These designed allotment area for 13.55 square kilometers，Yearly Output ninty trillion. Allotment intrinsically ocurrence of coal seam compare stabilize，coal seam pitch eight－twelty acid，average coal thick 4.01m，integrally nature condition compare simplicity， Both methane and carbon dioxide content relatively low, and neither do inflow of water no large either. On the basis of Preliminary Design，said shaft opt in adopt three vertical shaft fluctuate mountain exploitation，coal seam grouping band region fluctuate mountain co- disposal mode of opening，design adopt comprehensive mechanization full-seam mining stopper art，incline longwall method，treat goaf with whole straddle alight law from actual geologic information instance proceed allotment exploit and stand-by mode. The Preliminary Design of the both both combine versus mine haul, shaft exaltation, shaft drain and ventilation of mines isopuant systemic equipment lectotype count，as well as versus shaft technical safety measures and environmental protection claim，complete wholly shaft. Both shaft whole realize mechanization，adopt advanced techniques and use for reference afterwards realize high yield highly active modernization shaft experience，realize one mine not both high yield highly active shaft thereby run up to favorable economic benefit and social benefit. Keyword： Vertical shaft, incline length wall, full-seam mining, comprehensive mechanization, high yield highly active 目 录 目 录 1 1 矿区概况及井田地质特性 5 1-1 矿区概况 5 1.2 井田地质特征 9 1.3 水文地质 15 1.4 其它开采技术条件： 18 2井田境界和储量 20 2.1 井田境界 20 2.2 井田储量 20 3矿井的生产能力、服务年限及工作制度 24 4 井田开拓 25