机电技术专业英语课件作者徐起贺张庆良pataalessonNineteen.pptVIP

尚辅网 / 机电技术专业英语 Lesson Nineteen Text Following Figure A.14 is a control panel. EMERGENCY STOP The EMERGENCY STOP button is red and is located in the lower left corner of the control panel. If this button is pressed, the feed and rotation of the tool is stopped and the control system of the computer is turned off. The EMERGENCY STOP button is only used in special situations. Some of these are the overloading of the machine, a machined part is loose, or incorrect data in the program are causing a collision between the tool and the workpiece. To reset the EMERGENCY STO