锥齿轮注塑模具方案毕业方案论文.docVIP

摘 要 注射成形是成形热塑件的主要方法，因此应用范围很广。注射成形是把塑料原料放入料筒中经过加热熔化，使之成为高黏度的流体，用柱塞或螺杆作为加压工具，使熔体通过喷嘴以较高压力注入模具的型腔中，经过冷却、凝固阶段，而后从模具中脱出，成为塑料制品。 本文以小型斜齿轮为对象，详细介绍其注射模设计过程。设计中主要运用等不同的软件分别注射模成型零件浇注系统、进行分析Autocad完成工程图的制作，并总结相关计算说明书。 关键词：小型斜齿轮；注射模；Autocad  Abstract Injection molding is the main method of forming thermoplastic parts, so a wide range of applications. Injection molding is the plastic material into the barrel through the heating and melting, make it become the high viscosity fluid, with piston or screw as pressure tool, cavity melt through the nozzle with high pressure injection mold, after cooling, solidi