基于MeshWorksMorpher和Isight的液压机上横梁结构优化.PDFVIP

基于 MeshWorks /Morpher 和 Isight 的 液压机上横梁结构优化 潘金坤 (南京工程学院机械工程学院， 江苏南京211167) 摘 要:运用abaqus 有限元分析软件对液压机上横梁进行强度、刚度校核，并抽取影响上横梁强度、刚度和 质量的关键因素;利用MeshWorks /Morpher 高端网格变形软件建立了上横梁的网格参数化模型， 进而建立以减轻质量为目标的液压机上横梁优化模型。并结合Isight 多学科优化软件进行优化分 析，得出了合理的上横梁轻量化设计方案。结果表明，轻量化效果明显，上横梁的质量降低了约 5. 74% ，为企业节约了材料成本。其分析思路和方法有较大的通用性和工程实践意义。 关键词:液压机上横梁 有限元分析 结构优化MeshWorks /Morpher Isight 中图分类号:TG315． 4 文献标识码:A 库 Structural optimization of hydraulic press upper beam based on MeshWorks /Morpher and Isight 例 PAN Jinkun (School of Mechanical Engineering ，Nanjing Institute of Technology ，Nanjing 211167 ，CHN) 案 Abstract :Checking intensity and rigidity of hydraulic press upper beam by using abaqus FEA software ，and ex- E tracting critical factors which might affect intensity ，rigidity and mass of upper beam ;by virtue of Mesh- A Works /Morpher high － end mesh morph software ，establishing mesh parameterized model for upper C beam ，in order to establish mass reduction oriented upper beam of hydraulic press optimization model． Carrying out optimized analysis in combination of Isight multidisciplinary optimization software ，obtaining 模 reasonable design plan for lightweight of upper beam． Result indicates that lightweight is obviously effec- tive ，mass of upper beam reduces about 5． 74% ，which could save materials cost for the enterprise． The