FSC赛车轮辋轻量化设计.pdfVIP

Mechanical Engineering and Technology 机械工程与技术, 2015, 4(3), 218-224 Published Online September 2015 in Hans. /journal/met /10.12677/met.2015.43024 Lightweight Design of Formula Racing Rims Pucai Ning, Chuanchang Li, Wei Xu, Yanan Ding, Mengchen Hu College of Automotive Engineering, Shanghai University of Engineering Science, Shanghai Email: 1149208692@ th rd th Received: Sep. 10 , 2015; accepted: Sep. 23 , 2015; published: Sep. 30 , 2015 Copyright © 2015 by authors and Hans Publishers Inc. This work is licensed under the Creative Commons Attribution International License (CC BY). /licenses/by/4.0/ Abstract According to FSC racing design rules, the wheel rim is used to be the object in this paper. The three-dimensional modeling software UG has been used to complete 3D geometric modeling of wheels. The analysis software ANSYS has been used to establish nonlinear finite element model of the impact block and aluminum rims. The impact parameters of the block and the rim are ana- lyzed. Finally, according to analyzed results, the lightweight design for rim has been carried out. The study can provide theoretical support for racing rim design. Keywords Alloy Wheels, Impact Test, Lightweight FSC赛车轮辋轻量化设计 宁普才，李传昌，徐 伟，丁亚男，胡梦晨 上海工程技术大学汽车工程学院，上海 Email: 1149208692@ 收稿日期：2015年9月10 日；录用日期：2015年9月23 日；发布日期：2015年9月30 日 摘 要 根据FSC赛车设计规则要求，将轮辋作为分析研究的对象，运用三维造型软件UG完成车轮三维几何建模， 使用分析软件ANSYS建立冲击块与铝合金轮辋的非线性有限元力学模型，分析了冲击块与轮辋的冲击参 文章引用: 宁普才, 李传昌, 徐伟, 丁亚男, 胡梦晨 (2015) FSC 赛车轮辋轻量化设计. 机械工程与技术, 3, 218-224. /10.12677/met.2015.43024 宁普才 等 数。最后根据分析结