机电行业基础英语上册冯宜丽Unit5章节.pptVIP

proverbs and sayings Conversation Movie Clip 在线教务辅导网： 更多课程配套课件资源请访问在线教务辅导网 馋死 PPT研究院 POWERPOINT ACADEMY * * Text A  CMM EDM 3 There are two primary EDM methods: ram EDM and wire EDM. The primary difference between them is the electrode used to perform the machining. In a typical ram EDM application, a graphite electrode is machined with traditional tools. Now a specially-shaped electrode is connected to the power source, attached to a ram, and slowly fed into the workpiece. While the workpiece is submerged in a fluid bath, the entire machining operation is usually performed. This process is used to cut plates as thick as 300mm and to make punches, tools, and dies from hard metals that are too difficult to machine with other methods. submerge: v.??使浸没，潜入水中，覆盖e.g. Torrents of water rushed down the mountain and submerged the farmland. 山洪暴发，淹没了农田。 The child submerged all her toys in the bath. 那孩子把所有的玩具都泡在澡盆里。 Text A  CMM EDM 3 There are two primary EDM methods: ram EDM and wire EDM. The primary difference between them is the electrode used to perform the machining. In a typical ram EDM application, a graphite electrode is machined with traditional tools. Now a specially-shaped electrode is connected to the power source, attached to a ram, and slowly fed into the workpiece. While the workpiece is submerged in a fluid bath, the entire machining operation is usually performed. This process is used to cut plates as thick as 300mm and to make punches, tools, and dies from hard metals that are too difficult to machine with other methods. die: n.??金属模子，印模，骰子 Text A  CMM EDM 主要的电火花加工方法又两种：滑枕式电火花和线电火花加 工，它们之间的主要区别在于用以执行加工的电极。滑枕式电火花加工应用中，石墨电极是用传统刀具加工的。现在一种特殊形状的电极与电源连接，系到滑枕上，缓慢地移向工件。当工件浸入液槽，可进行完整的加工工艺。此工艺用来加工300mm 厚的金属板并用难以用其他方法去加工的硬质材料制造凸模、刀具和模具。 译文 Text A  CMM EDM 4 In wire EDM a very thin wire serves as the electrode. Wire EDM is usually performed in a bath of water. The wire itself does not actually touch the metal to be cut; the