模具设计与制造专业英语黄义俊统一模板模具Unit3章节.pptVIP

Unit 3 The Plastic Mold Design Unit 3 The Plastic Mold Design 3.1 Lesson 6 Plastics and Classification of Plastics Plastic means pliable or impressionable. It is defined as the capability of being deformed continuously in any direction without breaking apart.[1] Following this definition，plastics could include glass, metals, and wax．Thus, it is evident that name plastics is misleading and not exactly correct．Today, however, the name plastics is identified with the products which are derived from synthetic resins. The synthetic resins are made by various chemical processes．Plastics