模具专业英语王浩钢14456第12章.pptVIP

Lesson 12  Mould cooling 　　One fundamental principle of injection molding is that hot material enters the mould, where it cools rapidly to a temperature at which it solidifies sufficiently to retain the shape of the impression. 　　The temperature of the mould is therefore important as it governs a portion of the overall molding cycle. 　　While the melt flows more freely in a hot mould, a greater cooling period is required before the solidified molding can be ejected. 　　Alternatively, while the melt solidifies quickly in a cold mould it may not reach the extremities of the impression.