一种消零频的傅里叶变换轮廓术.pdfVIP

Optoelectronics 光电子, 2017, 7(2), 71-76 Published Online June 2017 in Hans. /journal/oe /10.12677/oe.2017.72011 Fourier Transform Profilometry Based on Zero Frequency Elimination Xing-Yu Xu, Xuan-Xi Li, Xin-Tian Bian Jiangsu Key Construction Laboratory of Modern Measurement Technology and Intelligent System, Huaiyin Normal University, Huaian Jiangsu th th rd Received: Jun. 4 , 2017; accepted: Jun. 18 , 2017; published: Jun. 23 , 2017 Abstract The zero frequency component of Fourier transform profilometry directly affected the measure- ment range and accuracy; so a new frequency three-dimensional measurement method is pro- posed. CCD camera obtains a frame deformation fringe pattern, correcting the deformed fringe. There is no zero frequency component after the correction, then we recover the 3D shape. Com- pared with the way through the phase shift to eliminate zero frequency and the composite grating projection measurement, this method has obvious advantages, and only needs one frame of the deformed fringe to measure it in real-time. Theoretical analysis and experimental results demon- strate the effectiveness of the proposed method. Keywords Information Optics, Three-Dimensional Measurement, Fourier Transform, Zero Frequency Elimination 一种消零频的傅里叶变换轮廓术 徐星宇，李炫熹，边心田 淮阴师范学院，江苏省现代检测技术与智能系统重点建设实验室，江苏 淮安 收稿日期：2017年6月4 日；录用日期：2017年6月18 日；发布日期：2017年6月23 日 摘 要 傅里叶变换轮廓术中零频成分的存在直接影响了测量范围和测量精度，为此提出一种新的消除零频实现 快速三维形貌的测量方法。通过CCD相机采集一帧变形条纹图，然后对变形条纹图进行校正，使校正后 文章引用: 徐星宇, 李炫熹, 边心田. 一种消零频的傅里叶变换轮廓术[J]. 光电子, 2017, 7(2): 71-76. /10.12677/oe.2017.72011 徐星宇 等 的条纹不存在零频成分，再进行三维面形的恢复。与通过相移法消除零频、复合光栅投影测量技术相比， 此